Attention: TDR Forum Junkies 
I have been working on putting in my BD short throw on & off for a while now. Last time I was working on it, I got stuck having the wrong bushings cause they were from a NV4500 from a Chevy.
Going back to the beginning here, I had the round top and bought a square top from Standard so I can put in a short throw. I didn't have the carrier or anything for the square top so I called Standard back and they helped me out with the entire top assembly for the square top from a NV4500 off of a Chevy. Well the shifter arm on those have smaller diameter round ends on the shifter arm, so the bushings I took off there were to small for the BD one. I am needing the 2 square plastic bushings that fit on the round ends of the shift arm. They are square on the outside so they fit snug down inside the carrier.
BTW, I don't have my old top anymore, so I can't rob the bushings out of it.
I would appreciate it if someone could sell me some bushings if they have any extra. Standard doesn't have any.
Will try to get some pics up for reference.
JD
Going back to the beginning here, I had the round top and bought a square top from Standard so I can put in a short throw. I didn't have the carrier or anything for the square top so I called Standard back and they helped me out with the entire top assembly for the square top from a NV4500 off of a Chevy. Well the shifter arm on those have smaller diameter round ends on the shifter arm, so the bushings I took off there were to small for the BD one. I am needing the 2 square plastic bushings that fit on the round ends of the shift arm. They are square on the outside so they fit snug down inside the carrier.
BTW, I don't have my old top anymore, so I can't rob the bushings out of it.
I would appreciate it if someone could sell me some bushings if they have any extra. Standard doesn't have any.
Will try to get some pics up for reference.
JD
