Need Info on Ram Air Hoods

[Blackdog]

I've been tryin to find a Ram Air hood for my truck and I havent had very good luck finding one I like. I'm not even sure what all companies make them. If anyone has any info on where I can find some please let me know. Thanks!

------------------
2001 Black 24v Cummins, 3/4 ton, QC, SWB, 4x4, Auto, Every Option Available, Agate Leather, 2. 5" Skyjacker Lift, 33x12. 50 BFG Mudders on 16. 5x9. 75 Weld Super Single II's, White Face Guages, Isspro Boost/Pyro Guages on Dual A-Pillar, Cobra 29 LTD Soundtracker Nightwatch CB, Westin Chrome Brush Guard, Chrome Rocker Panels, 4" Chrome Tip, Dee Zee Diamond Plate Toolbox, Bed Rails, Tailgate Protector, Drawtite Removable Gooseneck Ball, Straight Piped, Silencer Ring Removed, K&N RE-0880, HX35 w/ 12cm Housing, JVD, BIG Custom Injectors, Pro Torque Convertor, Performance Custom Valve Body, Shift Kit, Holley Pro Lift Pump, Custom fuel lines

Test Mule for DMZ Performance

"Dodge Makes It, Cummins Shakes It"

 

[rotohead]

Well, I'll chime in here with info on AirBullDog Induction Hood that I have. You can view older pics of my truck and more pics. Also view Doug Hofeldt's truck. He's the builder/designer and his email is -- email address removed -- . Also his phone# is (208)232-2469. Feel free to email me with any further questions. -- email address removed --
There is also plenty of info if you search under "AirBullDog Hoods" and with my name (rotohead) or "john", another satisfied customer.

Chuck Krause

------------------
'98. 5 2500 QC ISB 4x4 SLT, Auto w/Transgo shiftkit, JRE 4" exhaust w/5"Tip, DD II's w/Module&Elbow, VA box, Rancho 9000's w/in cab adjust, Mag-Hytec trans&diff covers, Jacobs E-Brake w/BD autoloc, trans temp, boost & EGT gauges, 2Low Kit, Air Horns, Catz MSX, Drawtite Front Hitch, Brite Box, Steel Horse Billet Grilles, AirBullDog hood induction system, Brandon's stainless steel fuel lines, Intake heater system saver

[This message has been edited by rotohead (edited 05-02-2001). ]

[This message has been edited by rotohead (edited 05-02-2001). ]

 

[Bob Wagner]

there is also a Bull hood listed for sale in the TDR Classifieds.

The hood is located in KY thats close to OH


#ad


[This message has been edited by Bob Wagner (edited 05-02-2001). ]

[This message has been edited by Bob Wagner (edited 05-02-2001). ]

 

[BIG BOB]

Have you checked out this site?
http://www.truck-max.com/cgi-bin/catalog. pl?stage=3&cat=1&man=1&mod=13&type=1

 

[Forrest]

Jim Leonard has an induction hood like those. I was really impressed with the fit & detail. It comes with a new air cleaner base, that has a sponge doughnut interface to the hole in the bottom of the hood for a good clean air intake. The hood is double layer to route the air & also acts as a better insulator & lowers the engine noise in the cab.

Jim has a 215hp pump, stock turbo & a #5 plate slid all the way forward. Got to be way over 400hp & he keeps the EGT down with the ram air hood. #ad


------------------
Money Sink - 96, 5 speed, TST 380, HX40-16, 300 HP Injectors, Scourge BD 4200rpm Governor kit, McLeod, 4", CATless, straight out back, chrome turn down, ISSPRO Pillar, Delvac 1 & Amsiol, K&N, Mag-Hytec, 3:54, Michelin 235s on Alcoas, Rancho 9000's, Valentine One, Garmin.
Dutchmen 27' 5th Wheel.
GoldWing.