need link to injector swap

[DerekW]

Hey i ordered a set of industrial injection injectors to match the other truck. problem. never pulled injectors on a diesel before. i have seen people post pics and write ups on the injector swaps but I cant find any of them when i search on TDR. can anyone send me a link?

 

[WKruger]

Dymoite Diesel Directions and Tech Page

You'll need Microsoft Word installed. The rail was too big a pain to remove, so I left it on. Need to get an in/lb and ft/lb torque wrench. May also be a good idea to get new connector tubes. Expect to take at least 6-8 hrs. Good luck!

 

[DerekW]

Dymoite Diesel Directions and Tech Page



You'll need Microsoft Word installed. The rail was too big a pain to remove, so I left it on. Need to get an in/lb and ft/lb torque wrench. May also be a good idea to get new connector tubes. Expect to take at least 6-8 hrs. Good luck!

cody at industrial injection said I probably wouldnt need these. why do you reccomend me buying them? id rather have everything prior to teardown cuz right now its our only truck thats here in this state.

 

[lmills]

no need to replace the connector tubes unless one shows any type of leakage where it seals to the injector on the end. Just be careful to not damage the ends during removal or installation.