Need pics of your reunel rear bumpers

[XcumminsX]

Hey everyone. Just wondering if those of you with reunel bumpers could be so kind and link me to your pics or just go ahead and post them.



I ordered mine last week with a buddy of mine (he got one for his 03) i got mine with reverse lights. The plan is to paint whatever i can to match my truck (patriot blue) hopefully it will look awesome

 

[XcumminsX]

BUMP. . 30 views and no1 has a reunel... ?

 

[Joseph Donnelly]

I posted mine several months ago, and it is in the magazine, I think issue 47 but I can't find mine right now to verify that. I had a hard time getting the picture sized so I could post it, so you will have to look for it.

 

[fritzimax]

check out my gallery. I have the reunel rear bumper. Love it

 

[XcumminsX]

fritzimax thanks for the reader rigs pics. Man those bumpers look pretty beefy i cant wait to have it on my truck!

 

[fritzimax]

Good luck with the new bumper once you receive it. Be advised they do not send instructions (not that you really need them) The bumper is heavy, I left it on the shipping pallet and used two jacks to lift it to the frame. Also you have to remove the rear and mid bed bolts and loosen the front bed bolts then jack up the bed a good 4" maybe more to remove your factory trailer hitch (if you have one) you will see. good luck. Pete

 

[Joseph Donnelly]

I found issue 47 and the bumper is on p. 18. There is also a picture showing use of an engine hoist to lift the rear of the bed so the stock trailer hitch can be removed. You then let the bed down, bolt it into place (verify alignment of it before tightening the bolts), and use the hoist to lift the Reunel into place. Mine was extra heavy because of the winch.