2nd Gen Non-Engine/Transmission Need the size of the fuel tank vent pipe 2002

[rweis]

I am adding a bypass regulator after the lp and want to send the bypassed fuel back to the fuel tank vent line.



I need to know the fuel tank vent line size so I can get the correct fittings to run the bypass line back to it.



Thanks,



Bob Weis

 

[csutton7]

if I remember right on my '99 the rubber burp hose part of the the burp system accepted a 3/4" tee---chris

 

[B.G. Smith]

Vent

3/4" sounds about right, I removed the outer filler neck and vent line (3 screws and loosen the hose clamps) and brazed half of a 3/8" screwed pipe coupling to the vent tube on mine, that is the vent to my aux. tank though. bg