Here I am

Need Windshield!?!

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

HELP!! Pain chipping off my new truck!!...

Talk About Static

Status
Not open for further replies.
Any of you guys know where I can find an inexpensive windshield for my truck, preferably bulletproof! The gravel around here is horrible. TIA
 
http://www.pasarmored.com/systems.html







http://www.lascointl.com/home4_0.html

<hr>

Truck Bio:

Y2K+1 3500 4X4 Quad Cab 4:10:1 LSD



Somewhat Powerpacked By Bank's (4 inch exhaust,High ram intake,~Minus~wastgate mod to 38 psi,~Minus~ottomind TLC +guages,K&N) ,Blue Chip Premium FMC DTT~93%TC~&~VB~TC Smart controller, Mag-Hytec's Double Deep Trans pan,DD injectors+Van Aken+Autometer Guages. ,Piers Modified PDR HX turbo,Enterprise Engine PerformancePusher pump setup Front End Leveling Kit from Jakit with 255/85R16 BFG http://www.bfgoodrichtires.com/ M/T's Custom Rhino Liner (see Tool Man's truck feature)DeeZee Black Diamond Plate Bed Rails And Tool Box , WAAG Side tubes with kick~outs Mopar Performance accessories-Sill plates-hitch cover-cargo aux lamp'n'Power, Hadley air systems 150 psi comp and air storage. DynaMat Sound deadening applied to entire cab and doors, Check out Tool's Stuff#ad


N. E. T. D. P
 
Last edited by a moderator:
Tim- I don't think those would be cheap, and bullet proof doesn't necessarily mean chip proof. They don't care if the bullet makes a huge chip, so long as it doesn't go through. A good idea though.
 
Not sure about where to get it, but something they never tell you is to leave your windows down (just a little) for about 12 hours to let the windshield seal... If you close the door with all windows up the windshield may not seal right and will always leak.



Darren
 
Be careful with cheap windshields as some are made in China and have distortion especially when view from an angle.
 
Call Clearlite Auto Glass. ( 280 5666 ) They replaced mine last year for $212. 00.

Came to my house, did a good job. I'm happy, no distortion, looks just as good as the original.

Tom
 
Status
Not open for further replies.
Back
Top