I have a new 3/4 ton 2wd. I put a bumper replacement on the front that weights about #250. The shocks are really soft and I get quite a bit of bounce with the extra weight. I noticed that most people are putting Rancho 9000's on their 4x4's but I am not interested in the adjustable shocks for the front of my 2wd. What suggestions do ya'll have? Also I would like to raise the front slightly, just an inch or so. I used spacers on top of new heavier coil springs on my 91 with good results, just wondering if there is an easier (cheaper) way to get the front end up. The back of this pickup sets nearly as high as the 4x4 Cummins I traded in but the front is really low. I just want to even it out a little.
Thanks,
Chace
Thanks,
Chace