New Smarty POD Settings

[SShafranko]

My friend just picked up the new Smarty. We are both EDge guys and have no experience with Smarty. I'm hoping that someone can help us to get a starting point for the settings. His mod are as follows: 90hp injectors, CFM intake, HTT 64 turbo, ATS exhaust manifold, 5 inch exhaust, air dog, edge EZ, boost fooler, CP3 mods and SB DD. I probably missed a couple but that is most of it. We will be installing it shortly and anyone with a simmilar set up if you could please help. Hopefuly it works out and i will be picking one up also.



Thank you in advance!

 

[JVolpe]

Well not too far off from my mods.



I would load SW 7, TM3, RP2, Timing 2, wastegate off, RPM limit high. EZ on Level 1 for daily driving. Set PoD to around 40-45 for daily driving and see how that works. Adjust the PoD number up or down and see what it feels and drives like.



For full power PoD to 99 and EZ to level 2 or 3.



Just probably a good place to start. I see people running SW 9 with less mods, I don't think they are getting the best results that way. Just my . 02.

 

[SShafranko]

Thanks J. If my friend wasn't so WHIPPED we would have installed it tonight.

 

[boomchadda]

Hahha nice sash. .

 

[Joseph Donnelly]

I suggest staying with stock rpm (you should still get more than stock as Smarty doesn't defuel heavily over 2900 rpm) if you have stock valve springs.

 

[SShafranko]

I suggest staying with stock rpm (you should still get more than stock as Smarty doesn't defuel heavily over 2900 rpm) if you have stock valve springs.

I agree. Thank You