Archived new vp 44 installed and missing

[RolandJ]

i installed the new pump two days ago and it was running fine. yesterday between 1200 and 1800 rpms it seems as if its not getting fuel or that maybe theres air any other rpm it runs perfect. i tried it w both the edge box on and off still same . has any one had any probs w this or is there a bad injector. Im goin to be leaving on a trip and wanna make sure i have no problems .

 

[RolandJ]

im thinking maybe something is wrong with any injector. if i put my stock ones in are they to small to run w my turbo that i have on . please any info or comments .

 

[Missouri Mule]

I thinks it is the pump, any codes?



The stock injectors should spin the wheel with a 14cm exhaust housing but I don't think your going to have the power your used to.

 

[RolandJ]

it doesnt do it when you first start it up pump is holding at 16-17 psi and whhen you get above 1800 rpms its fine. i hate to go through all that changing injectors but havent gotten much feed back :{

 

[Graphic man]

could be a bad injector (pop pressure is off)... try your stockers and see if it still acts the same

 

[RolandJ]

just did stockers runs fine as of right now im gonna drive it tomorrow and see what happens. any way of checking to see which is bad or to i need to send them back to ole poole?

 

[Graphic man]

i would send them to someone that can pop test them if your stockers fix the problem