Nitto 295-Where is the Air PSI Thread???

[midlife crisis]

Okay- It all came together today. Wheels & Tires are On!! Very pleased with the appearance, and no real noticeable loss of power.

I thought I read somewhere (I did try a Search) on what pressures Nitto 295 owners found best. Right now all 4 are at 50, the fronts look soft... but seem to ride okay.

Sure would appreciate any comments. Thanks-

 

[Matt400]

My D rated Dick Cepek's are only rated for 50 so thats what they get. Whats the sidewall say on those Nitto's- 50 or 65?

 

[midlife crisis]

D rated... 3415lb's @ 65psi max. I was planning on going up to 60, recalled reading some posts on this, but "old timers" has set in, figured I'd ask...

 

[Matt400]

If I had those I would try 65 in the front and 55 in the rear.

 

[CATwrench]

Had a set on my 05', if I didn't run them at 50 the sidewalls would roll too much around turns. Go no less than 48 on the fronts.

 

[JasonCzerak]

yeah, I ran mine nitto's at 65psi at first. I noticed alot of flex. they basicly sucked at 65psi. . I lowered to 50psi all the way around and things are much more stable.



I have not yet tried lower then 50. hasn't snowed alot yet. And I don't play in the dirt. When race season startup around town, I'll try lower for better traction? who knows.