No "Spring-over" Required on my 2005

[RJOL]

Put the 5th wheel on the new 2005 yesterday, to test the clearance. I had some initial concerns, as the new 2005 sits about 2" higher, at the tailgate, then my 2001 did.



After hitching up, I had almost 5" of clearance at the tailgate and just over 5" at the front of the 5th wheel. This is just about exactly what I had on my 2001. Bottom line... Won't be doing the "spring-over. "

 

[EricBu12]

The newer trucks sag more than the older ones like my 01. Gotta have the softer ride when empty... .

 

[klenger]

I also noticed that the 3rd gens drop more with a load than my 01. 5 did. I also removed the rear axle spacers, which gained another 1. 25" at the rear axle and about 1. 5" at the tailgate. I'm very happy with the results.

 

[RJOL]

I also noticed that the 3rd gens drop more with a load than my 01. 5 did. I also removed the rear axle spacers, which gained another 1. 25" at the rear axle and about 1. 5" at the tailgate. I'm very happy with the results.

Ken... I may still do this mod and I appreciate your great instructions on your site. After all the mods/installs I've done in the past week or so, I think I will take some time off to just let the truck settle in a bit. Got a trip scheduled for the Oregon coast this week...