Noisey Steering...

[CrashCade]

Okay, So, I had a new Panhard bar made for my truck and they used Heim joints on each end. I know they can get noisey, but what are the chances that with the kift I have on my truck the almost all of the ball joints have gone bad in my steering. It makes the worst clunking and grinfing sound going from left to right and back the other way. It just sounds like metal slipping or popping on metal. The only thign I can think of is Ball joints.



Has anyone else had this problem?

 

[JFaughn]

It seems that over the yrs. there has been a bunch of problums , I'm not sure what prob. go with your yr. , try having someone turn the wheel while your under the truck and see if you can find the culprit.

 

[juicedcummins]

My 05 has just had both front wheel bearings and all 4 balljoints replaced with less than 40k.