Northern Ill Dyno Day

[Not_Agn]

I have a 03 8' bed with small damage on left rear. Right in between wheel well and tail light. Left taillight broke the two push in tabs. Lense is fine. I have a right tailight, and a brand new tailgate. Color is graphite. Anyone need anything let me know. Lee.

 

[todt061458]

It's 1. 15 pm Just got home. Shipper was short staffed today so I just had to wait! Sorry I missed the dyno meet I just had bad luck today business first. Hope all hade a good time. I will try and make it next time. Trucking is a uncertain job schedule a pickup and hope the shipper has a door for you to back into and staff to load ya. again sorry I missed the first event of the year in illinois

 

[Pigpen]

Just got home with the kids. THANK YOU to all especially Dennis and his wife for helping with the children. 207 hp and 552 ft lbs of torque is respectable. I look forward to see everyone again in the future maybe. I still have the 285/75/16 tires for sale along with the pyrometer gauge, Italian air horn, fifth wheel tail gate and boost elbow. Contact if you would like. 262-620-3247



Dennis, you still have that pac brake, forgot to ask? PM me when you get a chance.



Thanks again, it was worth the drive!



Jake and kids

 

[KBalzuweit]

Just wanted to say Thanks to Dennis for putting on a great event it was a blast and also Integrity Automotive for letting us smoke the place up. Karl

 

[bmoeller]

Hey Jake, you have a sharp looking truck.



Sure was fun being there. Oo. Need to get a GSK and lock-up switch installed. TC wouldn't stay locked. Was afraid that'd happen. Major bummer. Oh well, had fun on the rollers anyhow.

 

[Partyat33]

Thanks to all who participated, and watched. We had 16 on the rollers. It was a bit chilly but the weather held. Thanks to Integrity Auto for hosting, Wayne you are the man, thanks so much for helping out. Too bad about my clutch. Oh well. I will try to get a website up next week.



Email me you photos or videos and



-- email address removed --



BTW



Kyle you won a $50. 00 gift certificate from ADT. Shoot me your address and I will mail it to you.



Dennis

 

[KBalzuweit]

Here is a link to some pics, as soon as I can figure out how to add video I will.



http://www.geocities.com/kbalzuweit@sbcglobal.net/minookameltdown.html



Wayne, tried to email you the video, your email server would not accept a file that large. PM me your address and I will put it on a cd and mail it to you.



Anyone I have a pic of I also have some video of your truck, pm your email and which truck is yours and I will try to email you the video. Also have video of Lee's smoke show and Kyle's first runs.



Karl

 

[Eric Lee]

Got home fine - windy enough to blow me from marker to marker most of the 3 hrs home and snow limiting visability to 100 - 150 feet around the lake. What the heck - it was t-shirt weather yesterday -



Anywho - Thanks Dennis and of course Integrity Auto in Minooka. Hope everybody got home allright.



267 hp and 777 ftlb torque



- Eric

 

[mopars1]

Thanks for setting this up Dennis. Thanks to Integrity Automotive for the use of the building. It sure was nice to meet all of you. I don't know if I get the longest travel award but I am sure tired I got up at 3:35am and am about to crash at 8:30pm I took all of 3. 5 hours to get there. Round trip was just a tick under 500 miles for me.

 

[Not_Agn]

A big thanks to Dennis and wife, and Integrity Auto. Had a blast! Do it again real soon! Lee.

 

[CSnyder]

Thanks to everyone who helped make the whole day a success! I had a great time and made it back to Iowa in one piece after 5 hours getting here and 638 miles round trip. Hopefully we can do this again next year and it will be warmer! I think you guys who did the rain dance for BMoellers did it too long and caused the snow flurries!

 

[bmoeller]

I think you guys who did the rain dance for BMoellers did it too long and caused the snow flurries!

:-laf :-laf You'll have to take that up with Wayne.

 

[Partyat33]

Thanks to Jeff Bird for bringing the table and chairs.



I got the watch the video of my truck on the dyno yesterday, there was no lack of smoke !!!!

 

[Eric Lee]

Karl - Thanks for the video and pictures - that was really cool of you to take the time to do that.

Dennis - Thanks again - Hopefully you got Aron fixed up. Are you going to post dyno results?

-Eric

 

[Partyat33]

Yes, pretty soon. Right now Aron and I are going back to look at his truck. Looks like he will be staying here another day or so.



I am a little stiff and sore this morning. But it was worth it.



Dennis

 

[Partyat33]

DYNO Results

NAME HP Torque Truck



Kyle Stevens 284 911 Dodge

Jeff Bird 243 ? Dodge

Jake Richards 175 485 Dodge

Chris Snyder 177 ? Dodge

Lee Lyons 309 876 Dodge

Bryan Moeller 133 514 Dodge

Jake Krusemark 207 ? Dodge

Dennis Dolecheck 375 1041 Dodge

Eric Lee 267 ? Dodge

Mike Rosinski 231 462 Dodge

K Mcmann 122 ? Ford

Danny Ladis 240 496 Ford

Wayne Alberts Not as good as it should have been.









Thanks Again



Dennis

 

[bmoeller]

NAME HP Torque Truck



Kyle Stevens 284 911 Dodge



Bryan Moeller 133 514 Dodge



Wayne Alberts Not as good as it should have been.

Neither was mine. I KNOW the 133 is wrong (Should've been up there with Kyle's #'s. We have some of the same engine mods). A MS and GSK should fix that.



Using my speed in the 1/4 mile test and this, it says I should be at around 262 or so.



Hope Aron's truck is up and running quickly. Was bummed to not see it run. Hope it is a simple and cheap fix.

 

[Amianthus]

Simple, sure. Cheap, not so far. I am still in Minooka with Dennis. God bless the man and his family for letting me enjoy an extended stay. My one call today for an ECM had one for $1200 and a $240 core charge. And I'd have to pick it up in Gary, IN tomorrow. No thanks. I am hoping for better luck tomorrow. Ya know, that P-pump isn't looking so bad right about now. Anyone have an ECM I can borrow for a day?

 

[Not_Agn]

Anyone else have a pic or video of the 03 graphite dodge on the rollers? I got the 1/4 mile run. Just wondering if anyone had the two previous runs. Lee.

 

[Pigpen]

207 hp and 552 ft lbs of torque... ... ..... I am ok with it. Ran a low 19 in the 1/4.



These numbers were thanks to a Edge EZ, 4in straight pipe, and AFE filter... ... thought the number was going to be a little higher..... but I am ok with it!



Jake