NW Oregon/SW Washington Get Together

[Bob V]

How about a get together on Saturday, April 7th? If the weather is good we will pull out the BBQ and I will clean out my garage and we can crawl under the hoods of our trucks. We had a great turn out at our last get together but because of the weather we didn't get to spend time outside. Hopefully with more daylight we will be able to spend more time playing. Email me for directions and we will post more as the time gets closer. Hope to see many of you soon. Bob and Valerie

------------------
'97 CC 5spd 4. 10 5spd 315/75 16,Bushwacker,TST 280hp.

 

[Andy Perreault]

I never know what hours I'm working these days, they vary from week to week, and I usually don't know until the Monday of that week. If I'm not working graveyard shift hours, I'll probably be able to make it. I'll find out at the beginning of that week.
Andy

 

[Diesel Freak]

sounds good to me. I do not have any projects at the moment, looks like I may have to get something.
-Cliff

 

[claymike]

Hi Bob and Val sounds great to us we will be there.

------------------
Mike Clay
2001 HO,6 speed QC,2500,4x4Dark Garnet Red,ISSPRO E&B gauges on A Pillar, Rhino Nerf Steps Lit, Series 3000 brush & grill guard, NW Custom rocker panels, Jacobs E-brake, all options except leather, Reese 20k hitch. Towing a 30' Gulf Stream Sea Hawk 5th Wheel triple slide. The Mule

 

[Bob Beauchaine]

I will put it on my calender. I will have to work at least part of the day but might be able to leave Portland about 1 pm. that is if the good Lords willin and the creek don't rise. I think I've still got direction but if not I will email you.
Happy Trails

------------------
1993 250 4X2 - Banks Power Pack, BD Power Injectors, K&N Air Filter, 6 gauges and tweaked pump. 27lbs boost unloaded.
Horton fan & NV4500 5 speed.

 

[Bob V]

Andy, hope you can make it, we need more rammers from across the border #ad
.

 

[Teacher]

I will be there.
Want me to bring anything?
Jim

 

[Diesel Freak]

well, my straight pipe has a fatigue crack in it, looks like it is time for a Jardine system..... I will be bringing that to put on if it gets here in time. everyone can look at my silencer ring replacement also.

------------------
http://www.mudrunner.sites.cc

[This message has been edited by cdaledh (edited 03-14-2001). ]

 

[Bob V]

So far we have more or less the same crew as last time, and the possabilty of a few new faces. Teacher, we will let you and any one else who is interested what to bring. Cliff, did you get your exhaust fixed yet? See you all soon.
Bob V

 

[Diesel Freak]

exhaust has been welded, and I have installed the custom Cliffybuilt nerf bars. #ad
I will not be installing a 4" exhaust for a while, blew my wad on a Diablo Power Puck #ad

Those of you with overvalved engines can try it... . those of you with out the extra 12 valves can just sit and watch in awe. HEHE
Any other BOMBS on deck?
-Cliff

p. s. What time are you kicking this shindig off?
------------------
http://www.mudrunner.sites.cc

[This message has been edited by cdaledh (edited 03-29-2001). ]

[This message has been edited by cdaledh (edited 03-29-2001). ]

 

[Bob V]

Cliff,
You've been busy! I have been too but I have nothing to show for it. As of right now we will be starting around 3:30pm. I will not know if I have to work that day or not until Thursday, so if I don't work we will start a little earlier. We will be bring the BBQ out of hybernation. You can bring your own meat or we will have hamburgers available. Anyone who wants to bring a side dish or chips is welcomed to so. Valerie is making her famous "fire pasta salad". IF anyone has a specific project they would like to work on, let me know and I will make sure I have the tools available. Most of my tools are at work. Looking forward to seeing everyone again and getting some road time in some of these modified trucks.

 

[Diesel Freak]

I will be there, toasted clutch and all #ad

What is the head count?
-Cliff

 

[Bob V]

Hi Cliff, we keep getting new e-mails daily so its hard to say how many will make it, but it looks bigger than the last. I will post tomorrow on the time, when I find out if I have to work. I just got my painless wireing kit and C. B. , also have everything to change out the 5th gear nut but probably won't do that now. Looking foward to checking out your truck. See you soon
Bob & Val

 

[Andy Perreault]

Looks like I won't be there, I'm working too late these days. Hope you guys have a great time.
Andy

 

[MikeR]

The wife and I will be going. Got some business to do at noon,then heading over.

-Mike

------------------
'00 2500,QC,4wd,LWB,Dark Garnet,6spd,3. 54lsd,SLT,DD stage II,Psychotty air,10-level PM3,Jacobs ebrake,Isspro pyro & boost gauges,2wd-low,Airoquip fuel lines,Smittybilt nerfs,BFG 285/75 AT's
-----------------
'95 2500,Reg-cab,2wd,LWB,White/Star silver,Automatic,3. 54,SLT,Michelin 265/75

 

[Diesel Freak]

hey mike, lets race up Rainier Hill... . it is long and steep #ad

oh, and I want to try your clutch
-Cliff

[This message has been edited by cdaledh (edited 04-05-2001). ]

 

[Bob V]

Andy,
Sorry you won't be able to join us. Hope to meet up with you at another get together. For the rest of you, we start around 1:00pm and put fire to the BBQ around 3:00pm. Email me if you have any questions or need directions to our place. Looking forward to a great turn out. Bob and Valerie

p. s. teacher... sure hope you are still coming?

 

[Archive]

I would like to make it, but I have "dad duty" at 2pm every saturday... at least she is a fun kid!

 

[MikeR]

#ad
#ad
#ad
!

-Mike