Engine/Transmission (1998.5 - 2002) o ring for fuel canister

[PSL53]

Changed my oil, air and oil filter and fuel filter. I bought four filters from genos. They used to come with the o rings for both the filter and the canister. The filter had all the gaskets and o rings, but there was none for the stem in the canister. I have a whole o ring kit, but didn't think about it until I have everthing back together. Does anyone know what size the canister o ring is? Thanks

Peter

 

[DavidC]

I just checked my fuel filters from geno's and the o ring is scotch taped to the bottom of the filter. Kind of easy to miss if your not looking for it, especially taped to bottom of the filter. You did not miss it did you?. Without an O ring measuring tool I do not think I can help you with the size.



Dave

 

[BillGotthelf]

PSL53- I got 4 fuel filters from Geno's and the large rubber gasket was glued inplace at the top of the drop (bottom of plastic top ring) in filter element. I have a wix filter in the shop and that same gasket is loose and you fit it around the top of the filter element before dropping in cannister.