Attention: TDR Forum Junkies 
has anybody had this problem, i had a new ecm, pcm,transfer pump, injector pump put in (you can read about it at https://www.turbodieselregister.com...71690-has-daimlerchrysler-taken-you-ride.html see last page about my truck). because of the work being done and the sealer ship not being able to it started the fuel has gotten into the oil. the oil was like black ink if you wiped the dip stick with tp it would spread quite a bit. I've narrow it down to the area of the breather tube. i have a fleet-guard enviro guard and it was working great up till now. i was spuing oil all over the place after the truck was shut off it was dripping from the vent tube. i changed the oil three days ago and it has slow down a little but still get a few drops. i got good oil pressure when cold and warmed up well with in the high range brackets. no strange noise from the motor and no excessive smoke from the tail pipe cold or warm. just throwing it out there to see if anybody has had this problem?
Last edited:
