Well, got my first oil sample results back in from Monitor. Being this is my first sample I have no idea what to look for and what is good or bad, but at least it came back with "no abnormal results were discovered. " 
So, what should I look for from the results that would show a bad oil sample or that there is something wrong with the engine?
The list is long but here are some numbers from the sample findings(all other results were labeled as zero):
Iron - 6
Aluminum - 3
Lead - 1
Silicon - 4
Sodium - 1
Potassium - 3
Molybdenum - 96
Antimony - 16
Boron - 150
Magnesium - 21
Calcium - 3763
Phosphorus - 1418
Zinc - 1531
Fuel Dilution - 0. 5
Fuel Soot - <. 1
Water% - <. 1
I would assume these numbers are parts per million but not sure. The oil was Valvoline PB with just under 3000 miles on it.
TIA for the info.
Joe

So, what should I look for from the results that would show a bad oil sample or that there is something wrong with the engine?
The list is long but here are some numbers from the sample findings(all other results were labeled as zero):
Iron - 6
Aluminum - 3
Lead - 1
Silicon - 4
Sodium - 1
Potassium - 3
Molybdenum - 96
Antimony - 16
Boron - 150
Magnesium - 21
Calcium - 3763
Phosphorus - 1418
Zinc - 1531
Fuel Dilution - 0. 5
Fuel Soot - <. 1
Water% - <. 1
I would assume these numbers are parts per million but not sure. The oil was Valvoline PB with just under 3000 miles on it.
TIA for the info.
Joe