2nd Gen Non-Engine/Transmission Ok i have gauges now but no clue on how to put them on

[Silver Bullet Ram]

I'm stupid electrically. Can anyone give me any insight on how to hook them up? They are Westachs, I have a fuel pressure, boost and egt. Thanks in advance.



Gary

 

[MTatsch]

there is really to much to explain but to hook up the gauges its pretty much cut in dry the directions should tell up that but the light hookup all you have to is take a test light and find a wire that works of your headlight switch its easy once you remove the switch but make sure the light is on when the switch is on and off when switch is off then splice together then hookup ground hope this helps im not that good at explaining sorry

 

[Silver Bullet Ram]

Thats the thing, I don't have directions. Someone took them off their truck and gave them to me.

 

[Thomas]

A place to start might be the Westberg Manufacturing Incorporated website. A bit of looking should find instructions for their various gauges and allow you to ask more specific questions here.



Here is Westberg Manufacturing Incorporated's Hookup Help page.

 

[FYarcho]

Hi silver bullet. There is alot if info missing that would have to be addressed regarding your hook up. I don't know if there may be a member reading who is near you willing to come and help you out?



One suggestion I would have though, is if you have the electric fuel pressure sending unit from westach. I suggest getting the remote mounting hose from Geno's. My understanding is these units don't tolerate the vibrations of the motor if attached directly to the motor. Mine are atttached with the remote mounting hose I have no problems with them. But if you have a specific question about somthing I would be happy to help you.