Here I am

OK what next???

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

How to Protect Paint from OEM Mud Flaps?

Battery Web. Com anybody use them?

Status
Not open for further replies.
Okay guys once I get this pesky KDP thing out of the way I'm going to take another step, now what would you recomend? 3000rpm gsk?, PDR HX-35, AFC spring kit, maybe a fuel plate?? What would you guys recomend and why? Not going for any power records just a little more fun driving. Sorry I did a search and this topic may be one of those "here we go againers", but hey gotta keep your typing skills in check. ;) . Thanks again!
 
I would say the fuel plate and gsk and turn the star wheel on the afc. I still have to do the gsk, but like the results of the others. Good bang for the buck. Do you have guages yet?
 
I have EGT and boost gauges, as far as upgrades, I just have a AFE mega cannon and 4 inch JRE exhaust, so I guess I'm at the starting line of BOMBing.
 
I was going to recommend guages first if you didn't already have them.

Things to think about when bombing. Are you going to stay happy with an upgrade? If not, you may want to go a couple steps further the first time. i. e. fuel plate, you can always slide a wild fuel plate back a little to reduce EGT's, or you can get what you want now and spend more for another one later.

GSK, I'm going to go with the 4k gsk. I probably will never take my truck above 3k but just in case I do, I won't have to worry about trashing a valve or piston. I also might want to install an exhaust brake in the future, I'll already have the heavy exhaust springs if I do.

Have fun! These things are incredible!
 
Oh yah I do have 60lb exhaust valve springs waiting to go in along with a Pacbrake, just gotta get the time to do it, I also have a Bob V. E/F special on it's way so I'll do it all one time.
 
Already have:

- 4" Exhaust

- aFe Mega Cannon

- Gauges

- Pac Brake

- 60# Springs



I would do all at the same time, since its all in the same place

- #11 TST Plate

- Gov. Spring Kit

- AFC Spring Kit



Then start saving for a clutch.
 
Status
Not open for further replies.
Back
Top