Here I am

2nd Gen Non-Engine/Transmission overhead computer?

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Engine/Transmission (1998.5 - 2002) I'm leaking fuel

Status
Not open for further replies.
Hello all





I just installed the overhead trip computer in my 2002 CTD.



The install wasn't to bad every thing hooked up where it should, but now when I turn the truck on it shows the compass and temp then it displays a code of CCD. :{



Dose anyone know what code this is?



Thanks in advance.
 
do you have the directions on how to calibrate the compass?



One of us could look it up if needed.



Originally posted by diverig

Hello all





I just installed the overhead trip computer in my 2002 CTD.



The install wasn't to bad every thing hooked up where it should, but now when I turn the truck on it shows the compass and temp then it displays a code of CCD. :{



Dose anyone know what code this is?



Thanks in advance.
 
The only calabration instructions that I have are in the owners manual.





When the display gose to ccd the only thing that works is the timer.
 
diverig,



I read through the service manual and all I could find was this.



" If the “CCD” message is displayed, the use of a

DRB scan tool and the proper Diagnostic Procedures

manual are required for further diagnosis. "



CCD=Chrysler Collision Detection data bus network.



I would check all your connections again and maybe find someone with a scan tool :confused: :confused:



sorry not much help, let us know what you find.



John
 
Mine did something like that when I first hooked it up.

The long cable from the console to the fuse box has two connectors on the fuse box end, one obviously for the fuse box the other goes to an unused connector next to the white cover under the dash. I think that white cover is for the connector through the firewall.
 
Thanks for all your help I got it workingOo.



Hear is a list of the parts needed for installing this project.



56045921- AC wiring overhead

5013608- AA wiring overhead

55350660- AH module compass

4688204 sensor temperatur

56021433-AC Bracket ambent



There is one more part and that is the cover lens I dont have the part number for that because it was back ordered:rolleyes: .







Thanks againe for the help:D
 
What did you do to fix it?



Thats weird it listed someone else's post as the last one.
 
Last edited:
Status
Not open for further replies.
Back
Top