Here I am

P0236 code. How do I fix it?

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

OIl Analysis

A2's are in Diesel Tune Inc. has 9 of them

Status
Not open for further replies.
I know this is one of the turbo errors P0236 TC Boost System (according to the allpar.com Chrysler error codes, web site) or it could be P0236 Turbocharger Boost Sensor A Circuit Range/Performance, either way, I am hoping one of you kind gentlemen out there can help me determine how to make it go away, permanently. I have used my OBDII scan tool to remove the codes, but I would rather resolve the problem.



Any help you can give will be deeply appreciated.



:confused: :confused: :confused:
 
P0236 - MAP Sensor Too High Too Long



Could be a fried MAP sensor or your Xzillaraider. Only way to tell is to experiment with the Xzillaraider.



-Ryan
 
I had the same code problem you did. I determined it was my Xzillarader XZT. I called Quadzilla and got a return number and sent it back and they had a code update for it. If you have an early box like I did, this might be your problem.



Good luck, Wayne
 
Status
Not open for further replies.
Back
Top