Engine/Transmission (1994 - 1998) P7100 Views

[stick]

Anyone know where to find an exploded, or cutaway view of the P7100 pump on the net?



Thanks Stick

 

[illflem]

I've looked around a bit and this is the most I've found. Like to see more also.





#ad


picture courtesy of BD Power

 

[Forrest]

That's a great picture ... stock plate ... looks like the point of impact is too low. Should it be right on the bump?

 

[SlyBones]

Forrest, read here

http://www.piersdiesel.com/LeverAdj.htm

 

[MLee]

lever adjustment

is the adjustment lever visible from the top with the afc cover re-moved? to see if it needs adjustment? last time i was there this info was not being discussed. when i installed the plate it seems that it automatically slid all the way forward. any way, it bolted down more forward than the original plate was.

Marv.

 

[stick]

Thanks Bill, i was looking for more of a diagram, i guess! something that shows all of the pump and it's innards. Iv'e looked till my fingers hurt.



Forrest- The lever looks about right. Piers has a good explanition on his sight for the lever adjustment.



Stick

 

[Reddog1]

Although possible, the lever adjustment is very difficult to see looking past the fuel plate (with AFC cover removed). If you look through the slot on the engine side of the fuel plate cam, you can see the top flat portion of the lever. A dental type mirror would make it easier to see from the top.



Generally, more forward is not necessarily better.





Wayne

 

[bighammer]

Find someting to help you? I have a few drawings/diagrams that might help. PM me and give me an address to e-mail to.