Pac Brake question

[jtisdale]

I am buying a Pac in the next week or so.

1) I need to know what part number I need for the 3" turbo mount.

2) Also need to know if Pac offers a kit to fix the problem with the cruise control on my truck (HO). Or isnt this a problem when hooked thru the ECM? Or do I even want to hook thru the ECM?

3) Is there an accelerator pedal switch in the kit, and is it used in my application?

4) Is the brake pressure adjustable like a BD and will I need a gauge?

TIA

 

[Blu-meanie]

If you get the pedal switch, you got the wrong kit. There is also an adaptor for the exhaust manifold for 01 trucks. Make sure you get the right kit. Everything comes with it. If you try to buy the separate parts, it's much more.

This is experience talking. I had to take it back and reorder the correct one.

 

[csevers]

Some numbers

I just checked my boxes the brake kit marked 98. 5 24v was c14024e and the adapter (i don't know if you need) was c14099 I am not sure if there is another kit for 01 ho or if the ecm wiring is different. FWIW



Craig

 

[Blu-meanie]

I believe my p/n was C14025 from Pac Brake.



P/n 2014 from Camping World (I had to order it).



Has everything in it you need.

 

[Diesel Gunner]

I bought mine from Piers and everything was right.



I suggest that you give them a call. The only problem that I encountered was that the ebrake would not function when the highbeams were on. Called Pac Brake and their tech was very helpful. Turned out to be that DC changed the color of the wire that needed to be tapped to switch the ebrake. Corrected and everything has worked well since.



If you wash down your engine compartment take an extra minute to blow the solenoid valve out with compressed air and then get the engine up to operating temperature and cycle the ebrake a few times. I have had mine stick after washing down the engine if I did not do this. When it did, usually a tap with a screw stick handle would free it up.