Pac Brake V-clamp Help!!

[kompressor]

I am changing to a 4" exhaust while I install a Pac Brake. My 2004 has a 3. 5 inch exhaust. I am having trouble finding a v-clamp to go from the 4"

Pac Brake to the 4" down pipe. Does anyone have a part number for the clamp. It looks like the physical diameter of the brake flange is about 5". Thanks.

 

[JJPage]

Man I know exactly what you need, I too changed my cast elbow and downpipe to a 4".



I just went digging through my old parts box in hope of finding the receipt, but no luck. You have to buy the v-clamp from dodge, for an 04. 5 or newer, I just ordered one for an 05 to be easy.



Prior to ordering from Dodge, I went to Cummins, Freightliner, Peterbilt, Kenworth, and even a supply house that Freightliner recommended. None of these places had the size I needed.



When you order from Dodge, make sure you get the clamp between the cast elbow and downpipe, not the one between the turbo and cast elbow, they are different.



I experienced this on a Friday afternoon (day off), Had to wait till monday for Dodge to open, so I could order, took 3 days and about $25. 00.

 

[kompressor]

JJPAGE,

Thanks for the reply. Yah, I went to Motor trucks, they ordered in two different ones and they were too big. Will try Dodge.



Thanks Keith

 

[llotton]

The part number you want is 52121285AA Mopar. Larry

 

[kompressor]

Larry, thanks for the part number. That will help a lotl



Keith

 

[KBowar]

kompressor I have a 2004 with a 48re that I want to put the Pac brake on also. Did you order a brake for a 04. 5 and newer? I would like to know how it works for you after you have it installed. Would you pm me with the info. Thanks Keith

 

[Tony D]

I've got a brand new one I sell you if interested.

Let me know.

Tony