Pacbrake install?

[TSPowell]

I might purchase a brake for my truck and was looking through the install instructions. The mounting location for the compressor uses a bolt site from the intake horn. From the looks, it appears that this wouldn't be compatible with the ATS Arcflow manifold. Is this correct. If it works, let me know how!

 

[Prairie Dog]

I don't know for sure if it will interfere with the ARC flow but you do have to modify and lift the mounting plate (you'll have to buy a longer bolt) that holds the compressor if you you run the TST because it wants to smash the cable bundle. In hindsite, I wish I would have just extended the wires and mounted the air pump in the old location which is in the open area next to the turbo. The new position was used to keep the pump from freezing in colder climates.

I'll try to post a pic tonight of the interference.



Scotty

 

[staarma]

I mounted my compressor for my Pac brake in the old location for those reasons. I didn't want to mess with it above the engine. You may have to call Pac Brake though and get the old compressor location mounting instructions. They will send it to you or at least they did a year ago.



It mounts on the passenger side just to the side of the radiator tank and the fender well liner.

 

[Prairie Dog]

I looked at my truck and there's no way it will work woth the ARC Flow.

I would do like Staarma did and just mount it in the old location.

On a positive note, you wont be dissapointed with its operation!

 

[TCDiesel]

Here is another location.

 

[TSPowell]

looks like a good spot to mount it but thats where my TST is.

 

[TCDiesel]

Move the TST to on top of the intake Ram

 

[TSPowell]

That might work, Ive never really liked the location of the TST box anyways.