Painless wiring hookup

[FDIESEL]

I was hoping someone help me in hooking up the switched hot lead to the Genos interior painless wiring fuse box. A vendor that installed my EBrake and Torqueloc used a spade connector right off the interior fuse box. I would like to move that to the new wiring fuse box. Also I believe that most people are mounting the fuse box under the drivers seat?

 

[B9Mile]

The Blue Wire

Pull off the dash panel below the steering wheel. Locate the wiring bundle sort of under the steering column. There is a 10 or 12 gauge solid blue wire in the middle of that bundle. This is the switched 12v power.



I used it for my Painless switched power source. Some people have mounted their Painless panels behind this dash panel. I mounted mine under the dash up above the brake switch.

 

[Swisznie]

Re: The Blue Wire

Originally posted by B9Mile

Pull off the dash panel below the steering wheel. Locate the wiring bundle sort of under the steering column. There is a 10 or 12 gauge solid blue wire in the middle of that bundle.



There are 2 blue wires in that bundle, if you have problems with wire guages like I do the smaller one of the 2 is the one B9MILE is referin to.

 

[FDIESEL]

Thanks for the help

Thanks for the help, I'll pull the dash off tomorrow.