Paint for Cab Interior

[KodiakTrawl]

Replacing the driver’s side floorpan on my ‘93 W350.

Looking for suggestions on paint for the cab interior...

I’ve sanded the cab in preparation with 36 Grit on a random air sander. I’m slightly meticulous in nature, going on day 4 of this project...

I’ve got unlimited access and lots of experience using the International 990 paint system (Marine 2 Part Epoxy). This system requires that the proprietary primer be used as well. Brush/roll on application.

Am I over thinking this? Any reason not to use the marine two part?

Thanks!

 

[Timd32]

Replacing the driver’s side floorpan on my ‘93 W350.

Looking for suggestions on paint for the cab interior...

I’ve sanded the cab in preparation with 36 Grit on a random air sander. I’m slightly meticulous in nature, going on day 4 of this project...

I’ve got unlimited access and lots of experience using the International 990 paint system (Marine 2 Part Epoxy). This system requires that the proprietary primer be used as well. Brush/roll on application.

Am I over thinking this? Any reason not to use the marine two part?

Thanks!

No reason I can see not to go that route if you have it available.

Sounds like you did a good job on the prep, mine was done with POR15'ish product which was only a single stage product if I remember correctly, it has held up pretty well.

 

[KodiakTrawl]

Well... after 4 days of work - primer went on today.. top coat tomorrow!