Parting out 1995 regular cab RWD 5-speed

[BigPapa]

Parting out my 1995 regular cab RWD 5-speed that got totaled. I'm keeping the motor and the turbo is already sold. The only body panels that are good is the driver door, left front fender, and the hood. I think the tailgate is OK. Topper is trashed. Rear axle with open diff is good with no noise.



Complete 5-speed set-up with SBC OFE clutch. Flywheel, clutch fork, adapter plate, pedals, cross member, mount, and drive shafts. Everything you might need for a 5-speed/auto swap except for hydraulics.



Seats are in good shape. Typical wear to driver seat bottom and left side of the seat back. Bottom has had new foam put in and has a sheep skin cover on it.



I would like to sell the transmission stuff together.



Scott

 

[BigPapa]

transmission and associated parts sold.



Scott

 

[TFaucette]

what about the flywheel housing, i am doing a 47rh conversion and need the flywheel housing and i think starter

 

[diesel_dude]

are the dash and instrument cluster available?

 

[DVolk]

Is the wiring and the colom avalible , note i want the wireing from firewall inside the dash , i need the plugs that are on the firewall and the wireing to the dash

 

[BigPapa]

what about the flywheel housing, i am doing a 47rh conversion and need the flywheel housing and i think starter

If you are referring to the adapter plate that bolts to the block and the starter bolts to it, yes it is available. $200 plus shipping for plate and starter.

are the dash and instrument cluster available?

Yes, they are available, BUT, the top is cracked and it's a bit hacked up around the cup holder are. The cluster is good, 373K miles, auto. $50 plus shipping for the cluster.

Is the wiring and the colom avalible , note i want the wireing from firewall inside the dash , i need the plugs that are on the firewall and the wireing to the dash

The column and the wiring harness you are referring to are available. $175 plus shipping.



Scott

 

[College Cummins]

keeping the linkage off the pump i'm assuming?



James

 

[BigPapa]

keeping the linkage off the pump i'm assuming?



James

As of right now, yes.



Scott

 

[College Cummins]

well, if you change your mind you'll have it sold. sent my pump off for some work and it came back missing the linkage from the rear portion, where the shut off solenoid mounts

 

[DVolk]

How about minus the colum as im not shure if it work in my application

 

[BigPapa]

You want the wiring harness that connects to the engine harness with the 3 connectors right above the master cylinder and goes through the firewall, correct?



I'll just have to look and see how difficult it will be to remove and try to check and see what it's worth. I have no idea. The truck is an hour away from me and I may not be able to get back down there for a couple of weeks. As soon as I can I'll check and let you know.



Scott

 

[DVolk]

yes thats what im after or id just take the 3 conectors in the sire wall and a dab of wire to splice into , if the cab is junk a cut off wheel would make quick work to remove it . Imainly intested in the harness part that goes to the guages and the switch , not the other bs

 

[proskeeterman]

How are the mirrors, are they still in tack? If so, are they power? If so I'm interested in them. Also, did the front bumper survive, if so how much for it?

 

[BigPapa]

Mirrors are OK. They are the newer black plastic Mickey Mouse style. They are power and the right mirror is flat, not convex. I'll sell them for $40 plus shipping.



Bumper did not make it.



Scott

 

[proskeeterman]

Scott,

Not sure if you got my reply on the mirrors. Can you email me at -- email address removed -- and we can discuss details. thx.

 

[proskeeterman]

Want to buy the mirrors Scott, if you want to sell them, email me at -- email address removed --.

 

[BSMcCauley]

I might be interested in your knee bolster (lower dash panel, driver's side) if you've still got it and it's not cracked out already.

 

[BigPapa]

I'll check it tomorrow.

 

[BigPapa]

Here's what I've got. It shows some cracking that I have shown in the pics below. I don't see it cracking or breaking any worse than it is as long as you're careful with it. Looks like someone wasn't careful with it is why it's cracked. How's about $60 plus shipping? They're still available from Dodge for $160 if you want a new one.



#ad




#ad




#ad

 

[sstefanini]

Do you have the turbo exhaust elbow still?