Parts for Auto to Manual Conversion

[KBalzuweit]

Has anybody done this, and if so how hard is it?



Also anybody have the pedal and hydraulics?



I need all but trans and bellhousing.



Thanks!!



Karl

 

[TSuter]

I would love to know how difficult it is also. I'm planning the same swap in the near future!



Tom

 

[phillips5]

I to am planning the swap from my old 90 5 speed to my 93. It should be easy for me because all the parts will be side by side. If i get to it first I will let all know how goes it.

 

[cwienenga]

auto tomanual conversion

I too am exploring process to convert to nv5600. by the time you rebuild and update an auto. you are 2/3rds there expense wise I believe. I only want to do this once! then no more automatic considerations, ie: temp,slippage,exh. brake,etc.

1. what is necessary flywheel wise.

2. is the clutch linkage the same for diesel or gas -if you are looking for used





thanks

cliff

 

[phillips5]

Yes the linkage is the same but it is not linkage it is hydrolic. The hole is there to fit the mastercylinder into the auto chassy.

 

[Braveair78]

You guys may want to check out www.drivetrain.com

they have the kits for G360 swap to NV4500 and

NV5600. Pretty informative nonetheless though.