Passenger side window

[SWCampbell]

I have replaced the window switch to the drivers side door due to the intermittent working it was performing. After doing this I have the same issue so I have attempted to look for a harness to no avail. Does anyone have any suggestions or experience with this issue? If so anything is appreciated!

 

[seafish]

COMMON problem ... there is at least one broken wire in the black rubber wire loom that runs from the A-pillar to the door.
They break due to wire fatigue from opening and closing the doors and due to the cheaper wire the DC was using when these trucks were manufactured. Dorman makes a replacement harness that uses a better/finer strand wiring or you can fit your self using solder and shrink tube and additional wire. You'll need to I=eventually inspect ALL your door harnesses for their problems as switch functions fail.

 

[nkiewel]

Did you ever find a replacement harness for the door?

 

[MarkEagleUSA]

The OEM harness can be found on eBay. Can't get a link to work but the seller I bought from is quirkparts.

 

[Ozymandias]

Front Doors only OEM, if available horrible expensive.
Rear Doors, readily available from Dorman for a fair price.

Mine suffers at the drivers door right now.

 

[MarkEagleUSA]

Front Doors only OEM, if available horrible expensive.
Rear Doors, readily available from Dorman for a fair price.

Mine suffers at the drivers door right now.

The listings I saw were rear door harnesses.

 

[MarkEagleUSA]

Hope this works...

https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/201465636588

 

[SWCampbell]

Thanks everyone have been out of pocket. I have not resolved any issues due to working so much this year. Again thanks for all the replies!