I'm in the process of getting the truck ready for vacation (~3500 miles round trip). Last year, with the camper on the truck and loaded to around 7650 lbs, some of the mountain passes were a little hairy.
I replaced the brakes before last year's trip, but even with all new stuff the braking wasn't all that great.
I installed Perfornace Friction pads on my Jeep a few years ago, and they made a noticable difference. I've also read numerous threads on here about upgrading to 3" shoes, so I figured I'd see if I could improve the situation a little.
After "breaking in" the new brakes, I took it for a short test drive. BIG improvement!
I still need to readjust the rear, but even with them a little loose it stops much better. Of course, I'm running empty right now - the real test will be once I get the camper loaded up. 
It may not be as good as an exhaust brake, but hopefully it'll make things a little less scary going down Monitor Pass next month... .
For anyone getting ready to do their rear brakes, here are a couple great tools that made the job easier:
Hold down spring tool
Brake spring tool

I installed Perfornace Friction pads on my Jeep a few years ago, and they made a noticable difference. I've also read numerous threads on here about upgrading to 3" shoes, so I figured I'd see if I could improve the situation a little.
After "breaking in" the new brakes, I took it for a short test drive. BIG improvement!


It may not be as good as an exhaust brake, but hopefully it'll make things a little less scary going down Monitor Pass next month... .

For anyone getting ready to do their rear brakes, here are a couple great tools that made the job easier:
Hold down spring tool
Brake spring tool
Last edited by a moderator: