Pic of my clear corners and leds

[Seed Guy]

Got the G2 clears off ebay and some leds. I like it not too ricey. What do you guys think?

#ad

 

[ToolManTimTaylor]

SG Grab a nite pic if ya could (At a distance too) I am curoius if the reflectors will work well with those led's as they are front fire only. I was thinkin of doin that but ... .

 

[CORed]

I agree with TMTT, however, I like that the pic looks like it was taken at dusk.



If you could, take another at dusk, just further back so we can get an idea for what the overall look is.



Then tell us just what brand of clear corners you picked up as I have seen some good ones and some not-so-good ones.



Otherwise, from what I can see, I definitely like it!!!



How does it look when the turn signal is on? Does it flash quick, bright, and nice?



Steve

 

[**ICEMAN**]

i recently changed over to LED's on my '01. i used TRUKLITE's led's for my running boards,taylor wing,dually fenders and tailgate strip. a total of 32 lights and over $300. for all them.

i too want to switch out the brake/turn/park and cab clearance bulbs with led's . i found them here

http://autolumination.com/3157_3156.htm

i talked to the contact person on the website and he says due to the factory lense covers having facet's on the inside, the led bulbs will blur and just give the effect of a single light source if used with the rear red covers. he stated that with a clear lense with facet's (like the pic above) that the indiviual led's would be seen. i am going to order one 3157 20 led bulb for the rear and one 194 for the cab lights to see what effect they give before buying a complete set.

 

[ToolManTimTaylor]

AHA All is not lost on rear convert! I posted this a while back and the results from what I have heard from the guy have been great!

The rears can be done if you want to be creative.





http://www.orangeplug.com/truckweb/LEDProj.html