Engine/Transmission (1998.5 - 2002) Picked up an older Snow Wather Meth system...

[JR2]

Hey guys I bought snow H20/Meth system from a buddy last week. Going to try to install soon. Any hints or tricks I need to know about? Its one of the older systems (2 stage) with the little back box you hook a boost line to to control the pump.



Any advice on boost settings and jet sizes for it. It think it has two 625's with it now. I have a six gallon plastic tank I am going to put in the bed for supply.



TIA



John

 

[JR2]

Back to the top, someone has to have a tip or trick I can use??

 

[Jim Fulmer]

Use a boost bolt in the manifold like you would for a boost gauge or tee into the line to your existing gauge! Install the nozzles in the back side of the hat like in my readers pics, put the controller in the fender well wall like aft of the fuse block, set it to come on at say 20-25 and full on just under your max boost and install an on/off switch inside the cab to control it's function.



Jim