Picture of a #11 TST plate wanted

[JGK]

I've searched through some past posts but didn't find one. Does anybody remember if one had been posted lately and knows the subject or the link? Or maybe someone has a picture and can post it? I want to see the profile and check it against my BD plate.



Thanks,

-Jay

 

[SlyBones]

Post it here in the thread

 

[Deezul1]

I have a pic but darned if I can figure out how to put it here. Used to be easy.

 

[JGK]

Here's mine (I hope):



https://www.turbodieselregister.com/user_gallery/sizeimage.php?&photoid=1008&width=1



Looks surprisingly like the stock plate. The grind marks are from some custom "enhancements" done by the pump tech. when he tuned mine last year.



-Jay

 

[drawson]

Jay, Your plate looks really close to how my #11 looked before I modified it.

 

[JGK]

Gee, Dee, that was helpful Why am I not surprised yours is modified!



OK. One more time - and I'll clarify this time - a picture of an UNMODIFIED # 11 plate, please



(Hey Dee, at least it's comforting to know theirs is not much different than BD's. But I'd still like to see a picture. )



Thanks, all.

-Jay

 

[illflem]

Where's a Banks ad when you need it? They use #11s on most of their upgrades, remember a few pictures on their site.

 

[C Schomer]

Jay, it looks like the 11 I'm holding, except the guy ground the bottom corner off, like the stock plate. I didn't think that area did anything. Yours looks kinda like my stock plate after I got done with it, with the exception of the main fuel ramp! I can pencil trace this 11 and fax it to you if you want. Craig

 

[JGK]

Craig,



Yes, as I remember, he ground the bottom off a little. I think it helped to add a little fuel to the low end and smooth out the whoosh when the boost comes on. He may have doctored the top of that nose a bit as well. Just can't remember for sure.



Thanks for offering to send a trace. That will work just fine. Fax number sent via private message.



-Jay

 

[Turbo Thom]

Bill:

On the thing of the Banks kit , the wifes 98 has a Banks kit, turbo housing, twin air ram, etc. Does that mean there is a #11 plate in there also. I can't seem to find out. It was installed at camping world in OK by the previous owner.



. . Preston. .

 

[illflem]

#11 is the main plate that Banks uses for 94-96 autos and some manuals. The only way to be sure is to call the Banks engineering dept with your vehicle info ( not Banks info). That's how I found out that I had 11s, took less than a minute.