Here I am

picture

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

transmission Temperature

Help! is any one in the Seattle going to may madness

Status
Not open for further replies.
can someone explain in plain english how i can put a picture on here from photo point. .

i am computer iliterate so i could sure use the help

thanks guys
jason

------------------
2001 3/4 ton driftwood 24 valve HO 6 speed; silencer ring out, Glasstight cab high shell, Practical Solutions high idle kit, JRE 4" exhaust, Hadley Bullly Air Horns
Alpine CD player, Kenwood 750 watt amp, 2 10"
JL subwoofers custom truck box behind the seat.
Jason
 
Right click the photo point image and then click properties. Highlight the address tag in properties(hold down the left mouse button while highlighting the text), then right click again while the pointer is on the highlighted text and click on copy. Now go to your text box on the TDR and paste the text you copied inbetween these tags #ad
. Do not leave a space between the img tags and the text. There, wasn't that easy #ad


Scott W.
 
Thanks Scott. .

I am glad you put it in English for me...

#ad




------------------
2001 3/4 ton driftwood 24 valve HO 6 speed; silencer ring out, Glasstight cab high shell, Practical Solutions high idle kit, JRE 4" exhaust, Hadley Bullly Air Horns
Alpine CD player, Kenwood 750 watt amp, 2 10"
JL subwoofers custom truck box behind the seat.
#ad
 
ok now i have the link on here, how do i make it to where is just says something like "my truck" then automatically takes you to that?

Thanks Thomas... #ad


------------------
2001 3/4 ton driftwood 24 valve HO 6 speed; silencer ring out, Glasstight cab high shell, Practical Solutions high idle kit, JRE 4" exhaust, Hadley Bullly Air Horns
Alpine CD player, Kenwood 750 watt amp, 2 10"
JL subwoofers custom truck box behind the seat.
http://albums.photopoint.com/j/View?u=1667237&a=12780946&p=47703038&Sequence=0]
 
Thomas...

I mis-spoke when i said that i wanted to put the actual image on here, i just wanted to put a link to the image like alot of the other people have on here... . what can i do to take the link i have in my profile now and make to where i just says something like "my truck" and still have the link to my pictures?


------------------
2001 3/4 ton driftwood 24 valve HO 6 speed; silencer ring out, Glasstight cab high shell, Practical Solutions high idle kit, JRE 4" exhaust, Hadley Bullly Air Horns
Alpine CD player, Kenwood 750 watt amp, 2 10"
JL subwoofers custom truck box behind the seat.
http://albums.photopoint.com/j/View?u=1667237&a=12780946&p=47703038&Sequence=0]
 
<A HREF="http://albums.photopoint.com/j/View?u=1667237&a=12780946&p=47703038&Sequence=0]">FF1381's truck</A>

take space out from between the first < and the A and you will have the HTML needed for your link. you can change the wording to say "My Truck" if you just replace the "FF1381's" with "MY"



[This message has been edited by mongoose (edited 05-02-2001). ]
 
ok lets try this... .

crap
#ad


------------------
2001 3/4 ton driftwood 24 valve HO 6 speed; silencer ring out, Glasstight cab high shell, Practical Solutions high idle kit, JRE 4" exhaust, Hadley Bullly Air Horns
Alpine CD player, Kenwood 750 watt amp, 2 10"
JL subwoofers custom truck box behind the seat.
<A HREF="http://"http://<AHREF="http://albums.photopoint.com/j/View?u=1667237&a=12780946&p=47703038&Sequence=0" TARGET=_blank>]http://albums.photopoint.com/j/View?u=1667237&a=12780946&p=47703038&Sequ ence=0] ">My truck</A>

[This message has been edited by FF1381 (edited 05-02-2001). ]

[This message has been edited by FF1381 (edited 05-02-2001). ]

[This message has been edited by FF1381 (edited 05-02-2001). ]

[This message has been edited by FF1381 (edited 05-02-2001). ]

[This message has been edited by FF1381 (edited 05-02-2001). ]
 
If it's like reguler HTML code,, do like this...


< A H R E F = "http://albums.photopoint.com/j/View?u=1667237&a=12780946&p=47703038&Sequence=0]">FF1381's truck < / A >


The < / A > is important. It means something like "End HTML Code"

Don't put any Spaces in the Code, except between A and HREF


MerrickNJr

------------------
1998. 5 Dodge 3500, 2wd
5-Speed, Light Driftwood
Replaced the Resonator and Muffler with 6ft of 3" Aluminized pipe.
3. 55 rear-end
A. R. E. Camper
Michelin 245/75/16's

[This message has been edited by BOMBER_101 (edited 05-02-2001). ]

[This message has been edited by BOMBER_101 (edited 05-02-2001). ]
 
Ok, i now know why it isn't working right. You can't use HTML in the signature. It has to be UBB Code.

take the _ out from behind the first bracket. No spaces should be there. It should read like this "[URL"

[_URL=http://albums.photopoint.com/j/View?u=1667237&a=12780946&p=47703038&Sequence=0]My Truck[/URL]

------------------
Daniel McKeehan

<A HREF="http://sites.netscape.net/ramheadracing/banner.jpg">
1999 2500 QC/Short Bed/4X4 5 speed. Camper Package and of course a Cummins. </A>



[This message has been edited by mongoose (edited 05-02-2001). ]
 
<A HREF="http://albums.photopoint.com/j/View?u=1667237&a=12780946&p=47703038&Sequence=0]">My truck</A>

Click "edit" on this post, That's the pic. of the pencil and paper. Then highlight the text for your link and paste it in a notepad document. Whenever you post, simply copy and paste the tag into your TDR text box.

Scott W.




[This message has been edited by Bigsaint (edited 05-02-2001). ]
 
thanks guys for all your help,

i know this is quiet insignificant when compared to some of the other posts on here but i really appreciate ya'lls help

jason

------------------
2001 3/4 ton driftwood 24 valve HO 6 speed; silencer ring out, Glasstight cab high shell, Practical Solutions high idle kit, JRE 4" exhaust, Hadley Bullly Air Horns
Alpine CD player, Kenwood 750 watt amp, 2 10"
JL subwoofers custom truck box behind the seat.
My Truck


[This message has been edited by FF1381 (edited 05-03-2001). ]

[This message has been edited by FF1381 (edited 05-03-2001). ]

[This message has been edited by FF1381 (edited 05-03-2001). ]
 
Status
Not open for further replies.
Back
Top