Here I am

2nd Gen Non-Engine/Transmission Pictures of my stacks....

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Engine/Transmission (1998.5 - 2002) Injectors clogged at 193K Miles

Engine/Transmission (1994 - 1998) Hard Fuel Line Part Numbers??

Status
Not open for further replies.
It was a lot of hard work and time. There is about 30+ hours of labor in those between my brother and myself. Good thing we don't make them for a living, we couldn't afford to sell them. ;) The reason they took so long was because everything is square, etc. If you look at the stacks from the side one stack totally disappears behind the other.
 
Nice :) looks good and clean fit I live in Fairfield but have some freinds in Ronhert Park (can,t remeber how to spell it) so im up in that area some times. I will keep an eye out for for your rig i have,nt heard one with stacks yet .
 
BKenny said:
Nice :) I will keep an eye out for for your rig i have,nt heard one with stacks yet .



Maybe you could put some on your truck, then you can hear them all the time. I don't drive it really during the week, it's my weekend cruiser for the most part. I work in Cotati at the Peterbilt dealership, if you're up this way and want to check them out PM me and we can get together and tell lies. :-laf
 
Those are nice looking stacks. I particularly like what you did with the exposed pipes in the bed... nice and clean, uncluttered with clamps and such. I can imagine the work that was involved... . congrats on a cool finished product.



Duane
 
Thanks for the compliments guys. That was the look I was going for, clean and sano. Plus with everything being welded together all it takes is 4 bolts up top and one clamp down below to remove them, and on goes my other exhaust. Then I know when I put them back on everything looks exactly like it did when I took them off, perferctly centered, lined up with each other, etc.
 
Status
Not open for further replies.
Back
Top