Here I am

Piers "Stupid Pump"

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Injection pump question?

But seriously though... how does this go together???

Status
Not open for further replies.
Just wondering about the Piers "Stupid Pump".



What is done to it?

How much dose it Flow?

How much dose it Cost?



Or is all secret except cost?
 
Originally posted by Antrim93

Just wondering about the Piers "Stupid Pump".



What is done to it?

How much dose it Flow?

How much dose it Cost?



Or is all secret except cost?



Lots of goody's - 191dv's,4000rpm gsk, 13mm plungers and barrels, custom cam and camplate, etc.

Atleast 700cc's

Cost... Only a phone call away.
 
And with my setup listed below it will still cover the road up at 80 psi... ..... new dyno number coing soon.



Jim



Oh ya, I made a 6500 mile trip with this setup last fall but with a different set of Twins, mileage varied from 19-22 crusing at 2000-2200
 
I believe the Stupid pump is based on a P7100 pump also. To install one on a 1st gen will require a new cam, new timing cover, and other items I am not even sure of.



Most of the time unless you can find all the parts used. It is cheaper to buy a complete used engine from a 2nd gen.
 
Originally posted by Philip

I believe the Stupid pump is based on a P7100 pump also. To install one on a 1st gen will require a new cam, new timing cover, and other items I am not even sure of.



Most of the time unless you can find all the parts used. It is cheaper to buy a complete used engine from a 2nd gen.



Thanks for the input. I have all i need to do the swap. Also i'll have help from someone who has done these swaps in the past. I got a really good deal on the parts that ill be needing... (eccept pump)... Also i dont think i have to swap the cam. But never the less that will be custom anyway. Thanks again. .
 
Status
Not open for further replies.
Back
Top