Pillar Mount Question??

[Sky]

I got a dual full pillar mount and the tweeter is in between the 2 guage pods, and there is no way this is going to fit on the pillar as the tweeter sits almost right on the dash??? Did i get the wrong one? They say no. You must have to move that tweeter or something? Any pictures anyone?



------------------
2001 QuadCab,SWB,Auto, 4X4,4" Flowmaster Exhaust, Bosch 275 Injectors, K&N, 33" BFG AT'S... ... .....

 

[Bad340fish]

I just installed the autometer 2 gauge A pillar with tweeter. I did not use it as a cover but instead used it as a complete replacement for the stock one. It fits nice and the tweeter is about 3/8" from the dash and its fine. Sorry no pics Have fun #ad



------------------
Clark
1999 2500 QC SB 5spd, EZ, Flowmaster 3 chamber, K&N Re-0880
1968 Barracuda Formula S Viper Blue 11. 98@112 Currently scattered all over the garage

[This message has been edited by Bad340fish (edited 04-27-2001). ]

 

[FMcClaren]

I got the dual pillar from Geno,s and
the tweeter is in between the two gauges.
I took the OEM pillar right out and put one
screw on the top of gauge pillar.
Good luck
Mac B

 

[Sky]

So it is inbetween the 2 pods? Not below the 2?

------------------
2001 QuadCab,SWB,Auto, 4X4,4" Flowmaster Exhaust, Bosch 275 Injectors, K&N, 33" BFG AT'S... ... .....

 

[Sky]

LOL u must have posted that about 2 sec's before my post.

------------------
2001 QuadCab,SWB,Auto, 4X4,4" Flowmaster Exhaust, Bosch 275 Injectors, K&N, 33" BFG AT'S... ... .....

 

[FMcClaren]

Mine is in between and to the left, I thought
there were all the same. I ordered the
single without the tweeter and got the dual
with the tweeter. O well ,You can always
find something to stick in there.
Have a good one
Mac B

------------------
01 2500 Bright silver QC A/T 4x4 LB 3. 54 50 gal. tank tool box combo. Autometer gauges. Full length DC boards. DC flip out towing mirrors. chrome exhaust tip, front bumper S/S inserts. Reese 5th wheel hitch. 25 ft. Joyco eagle 5th wheel.

 

[OILBRNR]

I just got the triple with tweet yesterday from Geno's. It is replacing the old 2 pod add-on to exsisting pillar.

I can't remember, does the tweet just pop out? Does it press back in from the front of the new pillar?

------------------
'99 2500 4x4 • SB • QC • 3. 54 • LSD • AT • Leather • Mag-Hytec • Westach Guages • Line-X • Luverne Nerfs • Tommy Gate

Towing:
'99 28' Airstream Excella (~7000# dry)
'69 24' IMP Inca Twin Screw (~6000# wet)

 

[EMDDIESEL]

I have the triple pod with the tweeter. I mounted it over the stock one but i had to use a Dremel Moto-Tool with the sanding drum attatchment to grind the factory tweeter housing away so the Autometer unit would fit on top. Alternatley, you can order a factory pillar cover without the tweeter from DC and the Autometer cover will supposedly bolt (snap or whatever you want to call it)right on.

 

[Tomeygun]

is it better to cover the stock pillar or to replace it with the autometer pillar?

 

[Sky]

Originally posted by tomeygun

is it better to cover the stock pillar or to replace it with the autometer pillar?

I just coverd the stock pillar. It was a perfect fit and you cant even tell at all.