Here I am

Pinion Gear Problems

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

P Pump Engine Swap

Hump hose - Cummins part number anyone?

Status
Not open for further replies.
Well, sent 3/4 of a tooth of the pinion gear through the diff cover today and leaked all the oil out,also blew an axle seal. Question is how long can it go under almost stock power and very little towing? :( :confused: ...
 
Not very long most likely.



But get the cover off and clean all the other scrapenal out and look at it. You could have blown a spider gear.



If it is a piece of ring gear I wouldn't tow at all.
 
gears

Phil. . it's definetly a piece off the main pinion gear up front... there's no other teeth missing anywhere. The old owner launched it a couple before because of the gouges out of the carrier bearing section and ring gear housing, but nothing that's harmful. . looks ok for 250k miles i guess. . time to put 3. 07's in there LOL :-laf
 
Status
Not open for further replies.
Back
Top