pinstripping

[MTobin]

in issue 45 ron Khol wrote a article about Karen & Jim Rowe with there new 04,the picture show barbed wire pinstripping, does anyone know who makes this and where to get it? Oo.

 

[cumminstogetya]

There is a place by me called Custom Vans of Zanesville that sells it. I would check some of the car accessory places around you or on the internet. I have also seen it on Ebay. They have several different designs. The barbed wire pinstriping is kind of expensive, but I think it looks nice when tastefully applied. I have seen some people who were a little too liberal in the application process.



John

 

[MTobin]

where is zanesville?? got a state or city? is it made by 3m or who?

 

[Graphic man]

you best bet it to find a local sign or graphic shop in your area

they should be able to help you with what you are looking for,

make sure the use a good product (3M, Avery) the graphics would have to be printed with a machine that is called an Gerber edge or maxx2 it is a heat transfer using color foils, or a solvent machine but remember all printers and ink are not the same, some will last longer then others.

if you need more info PM me with any questions



Scott

 

[drno]

i went to my local auto graphic shop and they had it in their computer . with their machines they computer cut the design on any color vinyl. i used silver on my graphite 3500 and it looks fantastic. cost installed inclu :-laf ding tail gate was under $100

 

[bfriskey]

Just did mine in barbed wire pin stripping. I got mine from vinylgraphics4less in a yahoo store, 44. 99 delivered to my door. You get 150' roll, and the quality seems is good. Came ups in just a couple of days, free shipping. Hope this helps. mtobin I see your up in superior, I do have silver left about 90', pm me if your interested and we can talk about it.

 

[cumminstogetya]

Zanesville, Ohio. Don't know what brand theirs is, but it looks very good.