Here I am

PO606 code,

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Seized crossover tube?

Driveshaft woes

Having some issues, 2007 5.9 when shifting into overdrive at about 55 to 60, when it hits overdrive there is a vibration, feels like running rough, took it in for a diagnostic, mechanic said injectors 3 & 5 were bad, injectors have 15 months since remans were put in, but yet i look up the PO606 code and it states PCM/ECM (powertrain/engine control module) has detected an internal integrity fault in the PCM. could 2 bad injectors cause this fault or is my ECM or PCM bad, thank you in advance Doug
 
Likely 2 distinct problems that are not related. Integrity check does not always mean the ECM is bad, it could be caused by something else like a rub wire or shorted component.

Replace injectors with new not reman and see if that does anything for codes.
 
Back
Top