Here we go-I have had problems with the performance of my truck for a while now and when I did a valve adjustment about 2 months ago the truck run fine started better, but now I am noticing a white-gray residue build up on the conner of the bumper directly behind the exhaust pipe and the truck is running like crap. On my way back from town today I thought I might have developed a bad head gasket, my RPM seem to be higher then they should be and it feels like my power has dropped off. I replaced the overflow valve about 4000 mi ago. Any suggestions from anyone shot of getting reed of it? Any help is appreciated. Thanks in advance.
I just recently reconnected the pre-heater filter because when it was cold 30 degrees out (thats cold here in central Texas) and I started the truck with a little pedal it would blow all kinds of smoke, white, blue, gray and tend to want to stall out.
I just recently reconnected the pre-heater filter because when it was cold 30 degrees out (thats cold here in central Texas) and I started the truck with a little pedal it would blow all kinds of smoke, white, blue, gray and tend to want to stall out.
Last edited: