Power Edge EZ & VanAaken CPC

[Big Don]

Guys,



I've read about people using multiple boxes on one truck for a stacking effect. I have a VA CPC that we ran on a 99 for a while and then went to a

Banks power pack. I now have a PE Ez on my 2000, but am curious if I can run the Power Edge EZ and the VA CPC at the same time and what do you think the effects will be??? Will it harm the engine?? I am pretty sure the VA CPC is mainly for timing and adds a little power. What do yall think??? If anyone is running multiple boxes please jump in here and share the good and bad with me.



later

Don

 

[Bob Wagner]

Don, you can't stack a VA and EZ



Both boxes advance timing and add fueling



you can stack a EZ and a Edge box that will equal the Comp box

 

[LSMITH]

Bob is right, don't do it. What you can do is unplug the data link part of the EZ and then hook up the VA. You will then be using the EZ for a boost module and the VA for timing and fueling. I think the VA has a stronger bottom end, you may like it better than the EZ and you may not. You will have to try it to find out. Just make sure the data link plug (down behind the injection pump) for the EZ is unplugged before hooking up the VA. Good luck and have fun.

 

[Diesel Freak]

Don't do it... you will SCRAM out the CAN, and at a minimum P1693 will show up

 

[Big Don]

Okay guys,



I didn't do it. You see this is why I don't really like the electronics. I am a mehcanical engineer and I like the old mechanical trucks cause I understaqnd them better.



thanks for the help



Don