Ppe Xcelerator

[evldsl]

I just purchased the PPE Xcelerator today from Pacific Performance Engineering. I got the 300 horsepower programer and it also doubles as a DTC ( diagnostic trouble code ) reader. I don't know how this will effect my truck since I allready have the Juice and attitude control installed but it should be interesting. I paid $800. 00 for the programmer on a deal with one of the guy's at PPE. There is a write up about it in the latest issue of Peterson's 4 wheel and off-road.

 

[moolie]

lots of smoke

it's pretty good if you stack it with a pressure box it'll make it smoke a lot that's for sure

 

[Tomeygun]

why do the post a dyno run and then not scan over the print out (with the camera)?



Like a shot of the floor tells me anything...



Something just rubs me wrong with the way the brag, and then show that terrible video

 

[JCleary]

587...



right.

 

[Tomeygun]

587...



right.

well...

I guess I will let everyone in on a little secret we have here at lou fusz, We have a cummins test truck, and we JUST put it on the dyno, But please beware - This is CRAZY HP!!! Watch at your own risk!!



http://tomeygun.com/misc/MVC-008W.MPG

http://tomeygun.com/misc/MVC-009W.MPG

 

[Cigar John]

well...

I guess I will let everyone in on a little secret we have here at lou fusz, We have a cummins test truck, and we JUST put it on the dyno, But please beware - This is CRAZY HP!!! Watch at your own risk!!



http://tomeygun.com/misc/MVC-008W.MPG

http://tomeygun.com/misc/MVC-009W.MPG

That's funny, I don't care who you are. :-laf :-laf

 

[Tomeygun]

well...

I guess I will let everyone in on a little secret we have here at lou fusz, We have a cummins test truck, and we JUST put it on the dyno, But please beware - This is CRAZY HP!!! Watch at your own risk!!



http://tomeygun.com/misc/MVC-008W.MPG

http://tomeygun.com/misc/MVC-009W.MPG

Heck, we were even able to get it on a dyno sheet

IF THAT does not prove I am telling the truth, I dont know what does!!! :-laf



(disclaimer - This is a joke, please dont call me and offer a large sum of money for the this "test truck")

 

[JCleary]

Heck, we were even able to get it on a dyno sheet

IF THAT does not prove I am telling the truth, I dont know what does!!! :-laf



(disclaimer - This is a joke, please dont call me and offer a large sum of money for the this "test truck")

HA-HAAAAAAAAAAAAAAA!!!



That's great stuff.

 

[moolie]

i'm not too worried about all of that, i know what i've got and i have plenty of credible witnesses there who saw it. If you think it's not true there is nothing i can do or say to change it in any way. However my twins arrived today and they are going in monday so that number will be higher on tuesday. I just post the video with certain parts because it gets filmed for the whole session and then i just use the parts that i want. Like i said think what u want I have the numbers and plenty of folks who are very credible and have been involved in this business a lot longer then either one of us who were present at the time. It'll be upwards of 600 tuesday that's for sure. It's funny that people assume things because time will tell the truth, and then i won't have to say anything to anyone. It'll all take care of itself and then people will realize it and learn from it. You post crazy numbers mine aren't crazy my local rival has a 3rd gen and he's just a tad lower on hp and he has more torque so it's a fun competition between him and i. I just post my stuff having fun and u have every right to say whatever u want. However just remember that we have several dyno events in the future and starting next week the speedway will be opening up and i believe midweek we were hoping to attend and see what happens. I'll tape all that too just so people can see it. I'm not trying to make a A+ film at all i'm just trying to get it and have fun with it while i can. What would a 1/4 time be for a truck around 600 hp anyhow that's gonna be something that will help you solve your problem. But thanks for your opinion i'm gonna take it to heart and think about your ideas deepley right after i take a big dump... ..... thanks... ... ... ...



i'll even go get my exact weight before i go to the track and then we will figure out exactly where and what it should be and we will also see how well that new ats output shaft and intermediate hold up.

 

[moolie]

then we will have the video which u say is fake. and video of the runs at bandimere and timeslips and we will have the first hand people who are also going to be there. U obviously don't know anything about the people here and they have a truck fest in july and then there will be everyone there. Just remember whether u don't believe it or u do it doesn't matter because in july if 100 people or even 500 people witness something then i guess that pretty much takes care of anything u may be worried about. I just want u to make a deal that when the time comes and the people in this region who are reputable and credible tell u that it's true that u still stand up like u are today and say no way and that they are also all lying.





here is the software for the dyno i believe i did it right not sure though



http://www.superflow.com/support/sfviewer.exe





then you can have the actual charts graphs, numbers of not only myself but you can get every dyno run of everyone who was at the dyno day on april 16 here in greeley in which some pretty credible and important people attended. So i'm not sure about your fake dyno sheet i just have the software that was given to me when i dynod and then i can take it home and they also keep a copy there and i can view it in more detail since the software has a ton of options that you can use it's limitless what u can view with the software i mean honestly a guy could look at 1 run alone for several hours if he was going to break it down every way possible.



U know i think u should just get the dyno people to post them because if i do u might say they aren't genuine in your disposition towards me and this way i wouldn't even have seen or even known what would post. That would be the best way to solve your problem. download the software and find out who was running the show and i know for a fact they save the runs on file. i hope that with all that effort to disprove me u take 1 tenth of that effort and get the results posted for yourself that'll help u out and it'll also help me out. I'm sure you'll find the people who operate that dyno are more then qualified and should be able to find those runs no problem as long as u are polite. U can't start calling them liars and stuff like that. So go find out and if u don't that just proves you really don't know what you are talking about. I think that's fair. why you go looking for the runs just get every run that's been done on that dyno and post them that would be interesting to see. i hope u don't come on here and talk all this smack and then don't bother to go and get the runs yourself and view them from a unbiased 3rd party who has nothing to lose or gain and isn't a liar. However u might not like what u find. So go ahead i posted the software link knock yourself out and after that i'll post mine and i'm almost positive that every single one i have will be exactly the same as the ones they are able to present. basically it's like put up or shut up. i've done my part so do yours now and get these numbers i'm not gonna tell u who to get them from because if you havne't heard of the people who were running the show there then obviously you aren't very aware of anything at least as far as who's who and what's what.



This is gonna be hillarious unlike a dyno sheet with some fake numbers you are about to get a reality check unless you back out of it and then u would just be (how do they say it) yella.

 

[lmills]

And piers laid down 675 with two boxes and a twins.

 

[lmills]

And he doesn't have video of it

 

[Briman]

why do the post a dyno run and then not scan over the print out (with the camera)?



Like a shot of the floor tells me anything...



Something just rubs me wrong with the way the brag, and then show that terrible video

Pretty critical coming from you tomey.



I wouldn't be too hard on moolie until you try it.



Nobody made fun of you for buying the quad boxes.

 

[Tomeygun]

Pretty critical coming from you tomey.



I wouldn't be too hard on moolie until you try it.



Nobody made fun of you for buying the quad boxes.

1) I just thought that a large company would get a better shot of the run

But I was not aware it was Moolie that did the video, I just expect more from a reputable company



2) This was just some joking around (the making of the fake videos I did, and the photo chopped dyno sheet)



3)Moolie, I did not say I did not believe the HP you made, I just made a comment about the Company posting a sub-par video on their site (which is OK for a consumer, But less than OK for a big-time company)



4) I dont run any quad boxes, I run TST/EZ





AGAIN. LET ME REPEAT - It just comes off from the companies standpoint that the HOT Xcelerator is the only mod on moolies truck... BUT that is not true, right? You have supporting products to made that HP



If I was a consumer, I would think that all I need is one programmer and I can be like the dodge in the video



Moolie, I do not intend to go hunting for your dyno sheets (I already saw them on you site actually, and the number are pretty strong), I do however look forward to hearing how the twins do



Sorry this got out of hand, Just started as a comment about the practices of a certain company and how they portray there product due to a consumers dyno video

 

[moolie]

right on man thanks for giving the benefit of the doubt. I know no matter what someone will always be there to disagree or disprove products no matter what happens. However i have an update for the ppe xcellerator on the dynojet. It came to life with the twins.





on saturday we ran just the ppe xcellerator and the injectors of course, with the dtt twins installed instead of the big single and got 579 and 1060 or so torque. I said in all my posts that the ppe xcell was dyno'd on a truck with twins and that i guess that's what they get their increase by. Which is fine however, they should include that in their ad. Joe from ppe was basically just cool and told me he'd post a video if i wanted so i jumped at it and i'm happy with the results it's not a commercial by any means but it is authentic. I don't have a nicest camera out there but i enjoy making the video's regardless of the quality and over time i will be able to piece together quite a highlight reel so to speak.