Here I am

pre/post innercooler boost

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Having STACKS is COOL... UNTIL!!!!

just hooked up a boost gauge before the innercooler. haven't driven too much, but was surprised by how close (1-2 psi at 45 psi) the before/after gauges were. just wondering if this is normal. thanks in advance.



dave
 
Correct, it should be very close to the same pre/post cooler considering no major obstructions or easier ways for the air to escape. Post usually gives you a more accurate reading though because there is less turbulence and the air has lost a bit of heat.

-R. J.
 
Back
Top