Pre-Turbo Pyro install...

[EagleEye]

OK... Drilling hole for the pre-turbo pyrometer.



I remember when I installed my Banks Kit on my 97, they gave SPECIFIC location instructions for the pre-pyro.



I am at the point of drilling, but they say 'measure twice, cut once'. ANYONE have info or guidelines for the pyro hole in the manifold???



PLEASE HELP...

 

[JR2]

Its not my pic, but I think this will help. https://www.turbodieselregister.com/user_gallery/displayimage.php?&photoid=583&width=0

 

[EagleEye]

That is the general location...

But was wondering if anyone has the dimensions... makes it easier than 'eyeing' it in...



Thanks for the quick reply... will be drilling ASAP, just waiting to see if any more replies.

 

[LSMITH]

EagleEye, that was my pic that JR2 put up, it is in the right location, if you get it in a half inch circle it will work properly. If you want dimensions the only ones I know of are here http://www.tstproducts.com/gauge_install.html Take a look and see if that is what you want. Disregard the hole size mentioned, go with the hole size for your specific probe. Hope this helps.

 

[EagleEye]

Thank You...

LSMITH, That did it!!! Just what the doctor ordered.



Thanks for the extremely fast responses... installation complete, and working well.



Thanks again and I owe ya one.

 

[LSMITH]

EagleEye, YOU DA MAN!!!! You owe nothing, if the guages work and you are happy that is about all a guy can ask for. Good work and glad we could help. Howard.