Prettiest biggest intake for 2004-05

[CUMMINZ]

Who makes the prettiest/biggest intake & filter for 2004. 5-05 CTD?



Got pictures?

 

[4 wheelssmoking]

Take a look at my readers rigs photos, If you like. pm me, it is easy to do

 

[hasselbach]

Take a look at my readers rigs photos, If you like. pm me, it is easy to do

LOL, is the trash bucket a joke or is that for real? Sort of billy bob racing isn't it?



Well, I give you an A for using parts found in the garage to adapt... .

 

[Mark Craig]

CUMMINZ,



The AFE PG7 Stage II system has the largest filter (6 inch inlet) and mandrel intake tube with a 6 inch inlet. Call us if you have any questions etc.



Mark @ DPPI

 

[KYLE4]

Bd makes the prettiest Polished stainless heatshield bling bling

 

[nickleinonen]

Bd makes the prettiest Polished stainless heatshield bling bling

BD diesel performance or bullydog???



[sucks that now 2 companies have the same initals]

 

[Matt400]

Prolly BD Power, the one they show on their site for 2nd gens is like a mirror. Dunno if they have one for a 3rd gen. I don't mind that kind of setup but would rather have paper.

#ad


www.bd-power.com

 

[Ol'TrailDog]

Mandatory?

4wheelssmoking, are the potato chips and beer mandatory for a turbo install? :-laf

 

[Matt400]

This one is kinda fancy. .

The filter minder might need a refuser to keep venturi vacuum from pulling it down. If it had an elbow inside it would help so it only reads intake vacuum vs venturi vacuum.



They don't show it in this pic but the minder mounts to the right of the charge air sensor.



#ad

 

[HEMI®Dart]

Take a look at my readers rigs photos, If you like. pm me, it is easy to do

Clever. I'll bet it works as well as the $$ intake air sysytems.

 

[redfuelrules]

I like 4wheelssmoking setup. Whats the I. D. on the gutter tubing you used to plumb it from the bumper? Some 4" 'elephant trunk' (used for drainage behind retaining walls and other tight spaces) would prob. fill the hole in the bumper nicely.

 

[4 wheelssmoking]

Ol, Trail Dog, the beer and chips were for a local bombing party we had at Jeff Garmons garage. Hemi Dart the cost was about 100. 00 for all parts. Red fuel rules, I think the pipe is an extension for the down spout , maybe 3" dia. not sure how well it works but some cool air can't be bad

 

[Cattletrkr]

Got a BD X-intake for mine



Pretty---yes

Shiny---yes

AFE PG7---yes

Cheapest I could find w/ PG7---yes, by far-$275US as of last summer

Easy to keep shiny and pretty---Uh, no. Not if you drive anywhere



There is no lip on the filter end of the intake pipe, so keeping the filter on looks tricky. Mine has never come off or loose and I don't get any dirt inside the tube, so I guess it works. "Flow adapter" only replaces the plastic "silencer", not the whole intake tube. Don't waste your $50 on the adapter. 5" exhaust pipe cut to fit should work just as well. It's not the best fitting product I've ever bought, but it does work. Finish is awesome, until it gets dirty.

 

[CUMMINZ]

Mark

Check your PMs.