Problem Blinkers

[Digger]

Some time I will signal left but the right will come on or nothing at all. The bright lights won't work. Tried the hazards sometimes they work others times they don't or the left signal will come on. 90% of the time everything works fine. Just the other 10% of the time this is very annoying.



Anyone seen this before? I did a search but couldn't find anything. Any TSB's.



Thanks



Dan

 

[Pawpaw]

There was a recall on 03/04 CTDs for possible corrosion in the ECM connector. Have you had that done?



Go to the following web site and put in the last 8 digits of your VIN. It will tell you about any outstanding recalls on the truck.



http://www.dodge.com/webselfservice...recall&country=us&emailUrl=goToEmailForm('R')



Bob

 

[Bob4x4]

There was a recall on 03/04 CTDs for possible corrosion in the ECM connector. Have you had that done?



Go to the following web site and put in the last 8 digits of your VIN. It will tell you about any outstanding recalls on the truck.



http://www.dodge.com/webselfservice...recall&country=us&emailUrl=goToEmailForm('R')



Bob

That tsb is for PCM connector. Ecm only controls engine functions. but the one thing all your concerns have in common is the multi-function switch.



Bob

 

[Pawpaw]

That tsb is for PCM connector. Ecm only controls engine functions. but the one thing all your concerns have in common is the multi-function switch.



Bob

How right you are. I forgot because my '04 doesn't have a PCM. The ECM does it all. That's one of the few differences between 03 and 04 models.



Bob

 

[Digger]

No Incomplete Recalls or Customer Satisfaction Notifications Exist.



That is what I got. Thanks though.

 

[Bob4x4]

How right you are. I forgot because my '04 doesn't have a PCM. The ECM does it all. That's one of the few differences between 03 and 04 models.



Bob

Easy for me to remember recalls,I have done way too many of them



Bob

 

[Badunit]

Faulty signal/highbeam/flasher switch assembly? Loose or bad connection from the assembly to the main wiring harness? This is one component (at least I think it is one component) that is common to all your problems.