Propane for 7.3L equipped Ford

[Dieselnut59]

A friend of mine (even though he is a democrat and drives a phurd!) has a 2001 F350 4-door 2-wheel drive with the 7. 3L "powerstroke" and a 4-speed slushbox. He wants to put a propane injection system on it, but wants to use a tank he already has or a used forklift tank I can supply him with. We want to use as many forklift type parts on this system as possible because I have all sorts of componets in stock at our shop. I have connectors, hose, vaporizer/regulators, filters, solenoids, etc. I just need a "schematic" of how the mixer system works and I believe I can figure the rest out. Any help is appreciated!

Thanks, John

 

[lmills]

be very careful using drugs. That year PSD has powdered metal rods. They do not like large amounts of pane, meth or NOS. He should try to stick to making power with #2. Even then the rods may let go if he tries for more than 475-500

 

[Dieselnut59]

The regulator I plan to use is the vaporizer type. Liquid in, heated by truck cooling system (heater hose), vapor out. It is used on 1. 5-3ish liter engines. Should not be too much propane with the proper mixer. He already has a tuning box and some nice smoke considering it is a cacklebox V-8. He knows the engine is nothing compared to the Cummins, as they have a 1994 and 2005 Dodge/Cummins and a 1999 and this 2001 cacklebox furd. He has said if it pukes out (the engine or transmission), he will get a Dodge/Cummins. I am just trying to help the effort!