Pusher Pumps And Lift Pumps

[Floor It]

Ted,Igot my carter fuel pump from you. When I talked to the sales man I told him my mods that I would be doing and figured I would be around 500hp. I got the pump that toolman had a picture of and you said it was the low volume,due I need a different pump?I have not put this one on yet. John

 

[Ted Jannetty]

No I checked, they used to be painted black and now they are not.

 

[wyosteve]

Ted, when you get a chance could you also e-mail me the kit contents and price. thanks in advance-- I checked your website and didn't see it listed yet.

 

[Beast2B]

show me the money...

... right before I send it to you!

Ted, please PM or email me the cost for the kit as well. Thanks

 

[BFC]

Ted,



Is the Carter 15 psi/100GPH pump a direct replacement for the stock lift pump or do we need to buy your install kit or a new harness to make it work?



Thanks,



Glenn

 

[mbrolin]

Be a lot easier to post an email address. Prices posted would be helpful as well but that would be against Forum guidlines.

 

[TxDieselKid]

check it out...

Here is a link to the web site that it can be bought off of. I don't think that I am breaking any rules of the web site by doing this, but please let me know if I am. I will put my Evan Beck Disclaimer just to be sure.



AJB

------------------------------

Not associated with JRE

 

[BFC]

Don't know why you guys can't find it

Here is the link, just scroll down to the JRE fuel system component





http://www.jannettyracing.com/dodge.htm



OK He beat me to it, same here absolutely no ties to JRE whatsoever

 

[TxDieselKid]

Golly BFC... ,

First you copy the way I have the Comp hooked up, now my link idea, what next???



Mr. Jannetty,

What type of fuel system would you recomend for a set up that follows...



PE HOT COMP box

DD Super Mental Injectors

Hybrid H2E Turbo



This would be on several weekends where I take it to the track. Most of the time it will not have the Super Mentals in it but probly stage 3's. I am sure a 1/2" full fuel line, and a double pump system. What type of pumps though? Can't the Mallory be turned up a little? D@mn I wish we had the P7100 on our trucks.



AJB

 

[Ted Jannetty]

BFC, the 15 psi lift pump bolts in the stock braket just by swapping the studs in the top of the pump.

You will need the install kit, but still very easy.



TxDieselKid, I don't see what year your truck is but if it is 2000 or newer, the double pump system will support up to 500 hp.



There is more than sufficient fuel pressure, no reason to increase pressure.

 

[Floor It]

Ted,I looked at my reciept and it said 7psi 100gal,do you think this is enough for my application-Ez-edge PMX-3,Bully dog stage 5 inj's,power shot 2000 propane. I am up grading to the 1/2 in fuel lines too. John

 

[One Old Dog]

Pusher pump

Ted e-mail me the price I have 51,000 on the truck and I thank it is time to put the pusher pump in. Thanks Joe

 

[Ted Jannetty]

Floorit, that is exactly what you need for a pusher pump, but not enough by itself.

You still need the lift pump to step up the pressure to 15 psi.

 

[Floor It]

Thanks Ted,I'm keeping the factory pump,no need to get rid of it in my opinion, thanks again. John